Numerical Modeling, Verification and Experimental Validation of the Stretch Bending Process

Institute
Lehrstuhl für Umformtechnik und Gießereiwesen (TUM-ED)
Type
Master's Thesis /
Content
experimental / theoretical / constructive /  
Description

As part of a research project, a numerical simulation model for the stretch bending process is to be developed and validated using experimental data. The objective of this master's thesis is to establish a reliable and accurate finite element (FE) model in LS-DYNA that can reproduce the deformation and mechanical behavior of sheet metal during stretch bending.

The thesis is divided into four main areas:

1. Experimental Investigation of the Stretch Bending Process

Stretch bending experiments will be conducted to investigate the deformation behavior of sheet metal under relevant loading conditions. Experimental data, such as force-displacement curves and material deformation, will be collected and analyzed to provide a reference for the development and validation of the numerical model.

2. Numerical Modeling in LS-DYNA

A finite element model of the stretch bending process will be developed in LS-DYNA. This includes defining the material model, geometry, boundary conditions, contact interactions, and loading conditions to accurately represent the experimental setup.

3. Preliminary Experimental Validation of the FE Model

Following basic numerical checks, the developed FE model will be evaluated by comparing simulation results with experimental data. Key characteristics, such as force-displacement curves and deformation behavior, will be analyzed to assess the model's ability to reproduce the physical stretch bending process. The initial comparison will serve as a basis for identifying potential discrepancies and areas for model improvement.

4. Parameter Study and Numerical Model Optimization

Based on the initial experimental comparison, a systematic parameter study will be conducted to investigate the influence of relevant numerical modeling parameters, such as mesh size, element formulation, and contact settings, on the simulation results.

The objective is to identify a suitable modeling strategy that provides a balance between numerical accuracy, stability, and computational efficiency. Following the parameter study and model refinement, the predictive capability of the final FE model will be assessed using independent experimental data.

Requirements

Requirements:

  • Basic knowledge of numerical simulation methods and finite element analysis with LS-DYNA
  • Basic knowledge of material mechanics and sheet metal forming processes
  • Ability to work independently, organize tasks, and monitor progress
  • Reliability and a structured approach to problem-solving

The position offers the opportunity to complete a Master's thesis.

Application:

Interested candidates are invited to send their applications, including an up-to-date CV and academic transcript, to: tianyou.liu@tum.de

Possible start
sofort
Contact
Tianyou Liu, M.Sc.
Room: 0407
Phone: 089 289 13989
tianyou.liutum.de