Development of a TwinCAT Control System for an Electrolyser
- Institut
- Lehrstuhl für Energiesysteme (TUM-ED)
- Typ
- Semesterarbeit
- Inhalt
- Beschreibung
Reversible solid oxide cells (rSOC) generate electricity in fuel cell mode and convert electricity into hydrogen
and methane in electrolysis mode. Their economic viability depends largely on the lifetime of the
cells. In the joint project Life4rSOC, we are investigating the degradation of SOC short stacks together
with a start-up. To this end, the chair is building the StaTe 2.0 test rig: it operates an SOC short stack at
up to 900 °C and supplies it via six gas lines (H2, CO2, N2, CH4, CO, forming gas).
In this project, you will automate the test rig. Based on a hazard assessment, you will develop the safety
concept and implement it as a hard-wired safety circuit using Siemens components that brings the test
rig into a safe state in the event of faults. You will then implement the control system in the Beckhoff
software TwinCAT: signal processing, operating sequence control, alarming, control of the self-regulating
mass flow controllers (setpoints, actual values) and temperature control of the furnace, evaporator
and pipe trace heating. The electrician on site takes care of the control cabinet and field wiring.
Work Packages
1. Familiarization, review of the P&ID and creation of the signal and I/O list
2. Hazard assessment, safety concept, setup and testing of the safety circuit (Siemens)
3. TwinCAT project: I/O configuration, signal processing, control of the MFCs, heater control
4. Operating sequence control and alarming, interface to the plant PC
5. Testing, commissioning on the test rig and documentation
Start Available immediately
Scope Term project or research internship, 11 ECTS each (330 h)
Contact Jan-David Ridder, M.Sc.
Room MW 3711
Phone 089 289 16287
Email jandavid.ridder@tum.de- Voraussetzungen
- Knowledge of PLC programming (IEC 61131-3, e.g. Structured Text) and automation engineering
- Reading P&IDs and circuit diagrams
- Helpful: experience with TwinCAT/Beckhoff and basic knowledge of safety engineering
- Willingness to attend a safety briefing (working with flammable and toxic gases)
- Möglicher Beginn
- sofort
- Kontakt
-
Jan-David Ridder, M. Sc.
Raum: MW 3711
Tel.: 089 289 16287
jandavid.riddertum.de - Ausschreibung
-